The head is an important component of the pressure vessel. The forming process is generally divided into a cold process and a hot process. The cold process is divided into cold stamping and cold spinning. The hot process is divided into hot stamping and hot spinning, but no matter how it is formed, The manufacturing process involves productivity improvements and raw material savings.
2 Improvement of the manufacturing process of the pressure vessel head The closed tank used in the biogas slag extracting machine produced by our company is a low-pressure container, and the container head is non-orthogonal. As shown, the welding method is a lap joint structure. Due to the heavy weight of the single head, the work intensity is high, the work efficiency is low, and the production progress is affected; the raw materials are wasted more. After research and practice, it explores a way to improve production efficiency, reduce labor intensity, and save raw materials.
The raw material of the head is 4mm thick Q235 steel plate. The production is made by stretching the drawing die and is formed together with the pressing drum process. The original process is: cutting (shearing machine) stretching, pressing drum (press)-> Cutting edge (plasma cutting), the size of the blanking is: 1250x880, and the shape after molding is as shown. Due to the weight of a single piece, it is necessary to go through more than 3 times of repeated turnover and feeding, which is labor intensive and takes up a lot of people.
After exploration, the forming of the part is changed from shallow drawing to direct turning. The blanking ring is eliminated, and the original mold can be modified slightly. The process is changed from 3 to 2, and the changed process is: Material (profiling or laser cutting machine) flanging, pressing drum (press). After many modifications and verifications, the material is produced according to the shape and size of the finished material. As shown, the blanking process margin during the drawing is reduced, and the minimum raw material saving is 2. 21kg per piece; the production process is reduced by 3 channels. It is two lanes, which reduces the labor intensity of one handling and loading and unloading, reduces the staff of cutting edges, and improves production efficiency.
3 The actual application after the improvement of the manufacturing process is improved by the manufacturing process. The processed head and the can body (cylinder) are better welded, the peripheral gap is basically uniform and the gap is small, no longer used as before. The hammer is beaten many times, and the weld seam is formed well after welding, which greatly improves the welding quality and production efficiency, and reduces the labor intensity.
With the rapid development of technology and equipment, timely application of modern and highly automated machinery and equipment can change some old processes. By adopting new technologies, it can reduce the dependence on employees, improve the utilization rate of raw materials, and reduce labor intensity. ,Increase productivity.
Door panel: door panel is made of stainless steel 304 with no frame. Core materials are paper honeycomb, aluminum honeycomb, PU, EPS and etc. The installation sites of door lock, door closer and hinge are reinforced with square tubes of more than1.5mmthickness which are compression moulded by special technology.
Door frame: it is made of completely stainless steel 304. The connection types with wallboards are double-clip type and aluminum connection. The former is applied mostly to machine made wallboard and the latter hand made wallboard. The accessories are double window and lift type sweeping bar. The lock can be famous door lock or the owners can select lock brands themselves.
Specification: common sizes 800X2100, 900X2100, 1500X2100 or1800X2100, can customize to customers` requirements, the materials can be selected according to customers` requirements such as306Lor other special materials.
Features: the stainless steel 304 door we produced are of elegant appearance, sturdy and durable, acid and rotting resistance and thermal insulation. It is the first choice for high-end projects at home and engineering concerning foreign affairs that requires for anticorrosion and high quality such as electronics factory and food factory
Hospital Sliding Door,Hospital Automatic Sliding Door,Hospital Sliding Glass Door,Hospital Sliding Ward Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfgaragedoor.com