Design sunlight
In order to ensure the overall effect of the decoration design, it is advisable for professionals to measure custom blinds after the floors and walls have been completely painted, or to measure and reserve dimensions during construction by professionals.
Determine the dimensions of the measuring frame
The width measures the width of the outer frame of the window from left to right. The width of the window is the width of the top, middle and bottom of the window, which is the suitable width of the outer frame.
The height of the window frame is measured from top to bottom, and the maximum size of the left, middle and right windows is the appropriate height of the frame.
The same method of measuring the size of the inner frame to measure the outer frame size
The window depth is determined to be sufficient to allow free movement of the shutter blades. Different installation methods require different window depths: 8 cm depth is required for fixing or flat mounting; for push-pull installation, the width of the product to be installed is taken into consideration in addition to the width of the blade of the product, generally two layers. Push and pull to ensure that the blade needs 15cm depth, a single fan needs 10cm depth; folding installation needs to reserve 10cm depth.
Window is not a regular rectangle
The width or height of each measurement position of the window is within 5mm, which will not affect the production and installation of the shutters. If it is greater than 5mm, the windows shall be made up on both sides of the window to make up for the irregularity of the window. The shutters shall be installed on the wooden side; Can choose to install outside the way, that is, according to the widest, highest hole frame size to do a wooden frame, fixed to the outside of the cavern wall, the blinds fixed on the wooden frame. If the window is made of cement, slate, or other structures that are difficult to fix the louver, the lining wood and the wall need to be fixed, and then the product is installed on the lining wood.
Installation method
If the fixing method is fixed, blind windows will be inconvenient to clean, and generally, fixed installation is not selected.
The flat-opening method has good sealing properties and is suitable for the installation of small windows or single and two windows.
The push-pull method occupies less space and is suitable for the installation of general windows.
The folding mode is suitable for the opening mode of a plurality of windows, which is generally adopted when a partition or a floor-to-ceiling window is used.
Home decoration size data window space glass decoration design cement decoration partition shutter
Barbed Wire is used as insulation and Fence product. it is roped by the barbed wire and main wire ,during constructing, there are two forms: beeline installation form and twist cross form.
1. Galvanized Barbed Wire
material: hot-dipped Galvanized Wire (hot-dipped soft steel wire), electro-galvanized wire(electro-galvanized soft steel wire
weaving feature: it is roped so it is substance roping method is as follows
Pvc Barbed Wire
Pvc Barbed Wire,Barbed Wire Fence,Pvc Coated Barbed Wire,Barbed Wire Fence
Anping Weihao Hardware Wire Mesh Products Co., Ltd. ,