Note: Both the door sensor and the lock need to be powered separately. Do not supply power to the door sensor through the access control wiring. It is easy to cause the door to fail.
Species:
The access controller is connected to the door sensor, and the door sensor has only two interfaces + and-normally closed. The access control NC is connected to the positive power supply, the negative power supply is connected to the positive door magnet, and the negative door is connected to the com. As long as a loop is formed normally Can be connected in series.
The second kind:
The interface of some door sensors has 5 interfaces: positive electrode, negative electrode, NC, NO, COM, door sensor is normally closed. The access control MC is connected to the positive power supply, the negative power supply is connected to the positive access control, the negative magnetism is connected to the access control COM, the access control SR access control feedback is connected to the lock NC, and the access control GND is connected to the access control com.
The third kind:
Normally closed lock body wiring (electrically controlled lock / silent lock), the so-called normally open lock is normally open when power is turned on, and the door can be opened when powered on and closed when power is turned off, so the door cannot be opened once the power is turned off.
Wiring method: First, the positive and negative poles of the power supply need to be divided into two. The positive pole of the power supply is connected to the positive pole and L + of the electric control lock, the negative pole of the power supply is connected to the negative pole of the electric control lock and the com of the access control, and the L- of the electric control lock is connected to the NO
The door sensor button '+' is connected to the PUSH interface of the access controller, and the door open button-'is connected to the CND of the access controller, the switch signal, no power supply is required.
High Power Led Grow Light
Philizon focus on Greenhouse High Power LED Grow Lights and Full Spectrum LED Grow Lights Manufacturer China,Produce The Best Yields, Run More Efficiently, Use Half The Electricity Of Double Ended HPS.
LED grow lights are the most recent mass produced lamp on the market,although many people have not begun using them yet. Since the tiny LEDs might not be the first thing that you think of when you picture an indoor grow up,that is understandable.In reality,however, they truly are some of the most powerful,effective,and space saving grow lights that you are going to come across throughout your growing career.
Advantages
Upgraded Epistar chips,High Lumen,High penetration.
Zener Diode protection Each LED,one LED Out,other LEDs still work.
High quality material,Listed Certification Wires,Heatproof Tube,Zero-Risk to catch fire.
Efficient Full spectrum Special rations of Blue,Red and White for both blooming &fruiting stages.
Adopting isolated power supply,safe&easy to maintain&long life time.
Aluminum heat-conducting plate+high quality brand fans,efficient heat dissipation.
IR LED involved,it is not as bright as other leds,But promote the yield.
Plug with listed certificate safe to use.
Full Spectrum High Power LED Grow Light and High PAR for Plants growth.
Product Images
The Plug you can choose
Ageing Test
Application
Our professional High Power LED grow light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.
Package
Quality Control Systems
Warnings:
1.lndoor use only.
2.To avoid being damaged,do not use water or drip irrigation while using.
3.Sunshine lighting time should be 12-18 hours.
4.While irradiating the plants,the height of led grow lamp is not less than 10 inches,low height will cause the destruction of plants.
5.Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hung too high.
6.While taking care of the plants, please spray the leaves and branches 2-3 times everyday,to ensure the the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp.
Trade Terms
Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)
Sample will be delivered within 7 working days.
Discounts are offered based on order quanlityes.
MOQ:sample order are acceptable
Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.
New Design Grow Light,High Power Grow Light,High Power Grow Lamp,Led High Power Grow Light
Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumgrowlight.com
