1, the alien woodworking paint should pay attention to the starting from the board, should choose a small grain, light-colored sheet, such as eucalyptus.
2, pay attention to the wood line during construction, you can use the board to cut the strip directly, preferably the two diagonal places to make 45 degrees.
3, white latex can choose a better adhesion.
4, seal the primer, the board should be brushed back to the bottom of the treasure after buying it, if not, you can choose to clean the paint and open the brush again.
5, batch putty, it is best to use atomic ash, but the general painter is not willing to use, because its hardness is very good, so it is very difficult to polish it, you can discuss it with him, if he really does not need to use, putty with shaving Also, the putty powder should be finer, the glue should be mixed a little more, and then polished to reveal the plate.
6, primer, Chenguang primer can be brushed construction method, spray will cost some, the primer is best to thicken the primer, the primer is done three to four times, and then smoothed, preferably with water.
7. Topcoat, spray or brush the outer star coat usually takes two to three times. Before the last pass, do not use water to grind it. It should be very flat, then spray the top coat and it will be OK.
8, polishing, generally brush or spray the last time the paint does not need to be polished, and some painters use polishing wax, he is used to cover the ugly, can be casual during construction. For example, sag, brush marks can be wiped off with sandpaper, and then wiped with wax, there is no, this is just a good feel at the time, after a year and a half, when cleaning, the wax is wiped off, sandpaper printed Come out, the real polishing is polished with electric wool balls, not polished with sandpaper.
Full House Solution,Hanging Cabinet For Small Bedroom,Cream Bedside Cabinets,Floating Bedside Cabinet
Ningbo Oulin Import&Export Co.,Ltd. , https://www.oulin-oversea.com