In daily life, the transformer should be observed and patrolled, and the transformer should be regularly maintained and tested to ensure the safe use of the transformer. Therefore, in the daily life to do specific requirements for inspection.
In daily life, the transformer should be observed and patrolled, and the transformer should be regularly maintained and tested to ensure the safe use of the transformer. Therefore, in the daily life to do specific requirements for inspection. The following American transformer manufacturers will give you a detailed introduction.
Daily transformer maintenance and repair methods:
1. Check the appearance of the transformer to see if there is oil leakage in the transformer or smoke discharge. If you find out the problem in time, you can avoid the occurrence of the fire house. In addition, you need to check whether the parts are loose. If you find any accidents, you should immediately disconnect the transformer and check it before using it to avoid any hidden dangers.
2. Strengthen the measurement of the electric load. During the peak period of power consumption, strengthen the load measurement for each distribution transformer, increase the number of measurements if necessary, and adjust the three-phase transformer in time to prevent the neutral line current from being too large to blow the lead. The user equipment is damaged and the distribution is damaged.
3. Replace the fuse regularly, and the fuse selection must be compatible with the transformer capacity.
4. Listen carefully to the sound from the transformer. Is it the sound produced during normal operation? If not, take appropriate measures in time to find the cause of the problem, solve the problem, and avoid causing greater losses.
5. Regularly check whether the leads are firm. It is necessary to pay special attention to whether the contact at the low-voltage outlet connection is good and the temperature is abnormal.
6. Regularly check the oil temperature and oil color. The temperature and climate will cause oil changes. Therefore, it is necessary to keep the oil temperature not exceeding 95 degrees.
7. Check the dust on the distribution oil and high and low pressure casings to keep them clean and avoid short circuit or burned lines due to accidents.
Http://?id=224
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Galvanized coil, Galvanized pipe, Galvanized sheet
Shandong Xinsuju Steel Co.,Ltd. , https://www.sawlpipe.com