Equipment management personnel should be diligent in investigation, master the condition of equipment, pre-empt the reserve of vulnerable spare parts, and do a good job of preventive maintenance. At the same time, it is necessary to strengthen the study of business skills and establish a spirit of high responsibility for the company. Resolutely resist counterfeit products and prevent counterfeit products from causing losses to enterprises. Apply a uniform adhesive layer with a thickness of not more than 2 mm on one side of the carbon block, and support the carbon block through the support beam on the other side, and wedge the steel rod in place at the window with a wedge to support the support. There is a wooden block to be placed between the carbon blocks. Lift another piece of carbon into place. Before you sit in place, apply a uniform layer of adhesive to the location you want to place. Do not let the two bonding surfaces touch before you sit in place. Use two horizontal hydraulic jacks to slowly and evenly force another carbon block to the first lifting carbon block, make it bond and tightly combine, gradually increase the top thrust, to each jack 450,000 N, two carbon The joint between the blocks is not more than 115mm. Add a wedge to the bar window of the other carbon block so that the carbon block bonding surface does not loosen. Cover a layer of carbon powder on the bonding joint and remove the jack. Other carbon blocks were also constructed in the same manner as described above. After all the carbon blocks have been bonded, the two supports of the last two carbon blocks will not be removed until the surrounding sew paste is applied.
The following points should be noted during the use and storage of the sample axis: (1) Carefully use during maintenance to reduce bumps, so as not to affect the accuracy of the sample axis. (2) After the inspection and use, seal with oil to avoid rust. (3) If it is not used for a long time, the long shaft should be lifted and stored straight to avoid bending deformation. Once it is deformed, it should be stopped. Generally, the noise of the prime mover and the pulley mechanism is relatively large, and the noise generated does not matter. If air is mixed in the water, a loud noise appears when the flow rate is large.
Magnetic Pump have the magnetic seal, pump no leakage, safety, stable operation. Widely used in chemical industry and food industry. we have Magnetic Gear Pump, magnetic centrifugal pump, magnetic Screw Pump and magnetic rotor pump. base on all kind of pump's properties, pump be installed a magnetic coupling, the conveying medium has no leakage and the working environment is clean and tidy. No need to change the seal, easy to use and easy to operate. Depending on the medium being transported, the working environment is different and different pumps are selected.
Magnetic Pump,Magnetic Water Pump,Magdrive Pump,Mag Drive Pump
Hengshui Yuanhan Trading Co.,Ltd , https://www.yuanhanpump.com