Most of the northern houses began to install geothermal heat to withstand the cold winter. Now the south has begun to have geothermal heat. How should the geothermal toilet be waterproof? This is more detailed and more complicated than the ordinary bathroom.
If the bathroom is planned to have geothermal heat, it is usually painted with a layer of waterproof paint before geothermal. This construction operation is mainly considered from two aspects: one is that the geothermal pipeline leaks and will not leak to the downstairs; the other is that the waterproof paint is a chemical substance. If it is brushed on the ground heat, it will have a taste when heated in winter. Emitted.
For the waterproof construction of the geothermal toilet, it is necessary to make a waterproof coating after the floor surface is leveled. After the protection, the insulation layer and the geothermal pipe are laid. After the upper part is leveled, a waterproof and high-temperature resistant waterproof coating film is prepared. That is, the geothermal toilet is made of two waterproof layers, and the geothermal layer is provided one above the other.
Currently, there is an elastic waterproof material on the market. Their characteristics are: painted on the ground, to form a film-like rubber after drying, has very good elasticity, the general crack will not be pulled open, so it is better to use elastic waterproof material for geothermal.
If the bathroom is to be installed with a bathtub, the waterproofing of the wall cannot be ignored. If the wall is also made of elastic material, it can be mixed with cement or cement with water-repellent or elastic waterproof material. This can not only waterproof, but also paste tiles and tiles.
In a bathroom with a bathtub, the three walls in contact with the bathtub must be mixed with a dense agent or an elastic waterproof material and cement to paste the tiles.
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalves.com