The headstock of the CW6136 lathe has many II shaft gears and high speed. The gears are easy to wear. The maintenance rate accounts for 85% of the head box maintenance. When replacing the gears on the II shaft, only the 40J62-2 shaft is used first. For the retaining ring, the shaft can be pulled out from the left side and the gear on the II shaft is replaced (see Figure 1). Since the 40J62-2 shaft is used in the ribs of the headboard, the circlip pliers are obliquely blocked by the IV shaft and the VI uranium gear. Only after the IV shaft and the VI shaft are removed, can the 40J62 on the II shaft be removed. -2 shaft retaining ring is used to lift out of the groove, so that
Brass knurled insert Made of brass material, good thermal conductivity and heat resistance.
Widely Used On the Molding for Tightly Fixing.
Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection
China Knurled Nut,Knurled Brass Insert Nut,Copper Knurled Insert Nut,Brass Knurled Insert Nut, we offered that you can trust. Welcome to do business with us.
Brass Knurled Nut,knurled thumb nut,knurled brass nut,Copper Knurled Nut,insert knurled nut
Shenzhen Lanejoy Technology Co.,LTD , https://www.compressionspring.net