Micro syringe pump is a new type of pump equipment, which has a very important position in the medical and other fields. Micro syringe pump is composed of controller, actuator, syringe and other components, its main value is the liquid Accurate, uniform, continuous output. Understand the operation of micro-injection pump, for workers is a very necessary and basic work. Micro-injection pump operation procedure Micro-injection pump operation flow First, before use 1, check the micro-pump and dedicated extension tube. 2, ready to use supplies to the bedside, three check seven pairs and explain. 3, fixed micro pump power, open the switch. 4, extract the solution of the syringe extension tube, exhaust check whether there are bubbles. Second, the correct regulation, the use of micro-pump 1, check for air bubbles again. 2, will be filled with liquid injection pump connected to the infusion tube, after the row of air into the syringe seat semi-circular groove, syringe convex area should be close to syringe seat. 3, and then move the top block, the syringe plunger stuck in the top block of the tank, the pressure on the syringe block block. Third, disable 1, press the micro pump stop button. 2, first off, pull needle if necessary. 3, placement of patients, the final treatment. Through the above analysis, we can find micro-syringe pump operation flow is cumbersome, but not complicated. With the use of micro-injection pump has been affirmed. Accelerating the research and promotion of such products has also become the focus of many experts and scholars.
Shear Beam Load Cells
Shear Beam Load Cells are widely used where operators need to measure compressive forces. The core component of a shear beam load cell is a spring element. This element is a piece of metal that is elastically deformed under load and recovers the moment the load is removed.
The (single-ended) shear beam is designed for low profile scale and process applications. The shear beam capacities are from 100kg to 50t. One end of the shear beam contains the mounting holes while the opposite end is where the cell is loaded. The load cell should be mounted on a flat smooth surface with high-strength hardened bolts. The larger shear beam cells have more than two mounting holes to accommodate extra bolts to keep the hardware from stretching under stress load.
Shear beams are available of nickel-plated alloy steel or stainless steel for use in harsh environments.
Load Cell Central,Shear Beam Load Cells,Larger Shear Beam Cells,Load Cell Measure Compressive Forces
Zhejiang Nanhua Electronic Technology Co., Ltd , https://www.nhloadcells.com
