Plastic-wood flooring is a kind of high-tech green environmental protection material that is mainly made of wood-based materials, thermoplastic polymer materials (PE plastics) and processing aids. Wood and plastic properties and characteristics can replace the new environmentally friendly high-tech materials for wood and plastics. Next Xiaobian introduced the construction process of plastic wood flooring and the characteristics of plastic-wood flooring.
Plastic wood floor construction process
1. Plastic wood can use ordinary woodworking machinery to cut, saw, drill, and open ends.
2. Self-tapping screws can be used between plastic wood and plastic wood (self-tapping screws are recommended for outdoor use); self-drilling self-tapping screws are used for plastic wood and steel plates.
3. When using self-tapping screws between plastic wood and plastic wood, the hole should be drilled first, that is, pre-drilled. The diameter of the pre-drilled hole should be less than 3/4 of the screw diameter.
4. When installing outdoor flooring, use a screw between the wood profile and each keel.
Plastic floor features
1, waterproof, moisture-proof. It fundamentally solves the problem that wood products are liable to rot and expand and deform after moisture absorption and moisture in a multi-water environment, and can be used in an environment where traditional wood products cannot be applied.
2, pest control, prevent termites, effectively eliminate pest harassment, extend the service life.
3, colorful, many colors available for selection. Both natural wood texture and wood texture, but also according to their own personality to customize the desired color.
4, strong plasticity, can be very simple to achieve personalized modeling, fully reflects the personality style.
5, high environmental protection, no pollution, no pollution, can be recycled. The product does not contain benzene substances, and the formaldehyde content is 0.2, which is lower than the EO level standard. It is a European-level environmental protection standard. Recyclable use greatly saves the amount of wood used, is suitable for the sustainable development of the national policy, and benefits the society.
6, high fire resistance. Can effectively flame-retardant, fire rating reached B1 level, self-extinguishment in the event of fire, does not produce any toxic gases.
7, good machinability, can be set, can be planed, can be sawed, drillable, the surface can be painted.
8, simple installation, convenient construction, no complicated construction process, saving installation time and costs.
9, no cracking, no expansion, no deformation, no maintenance and maintenance, easy to clean, save on late maintenance and repair costs.
10, sound-absorbing effect is good, energy-saving, so that indoor energy-saving up to 30%.
Plastic floor maintenance
1. Remove dirt and residue with soap, hot water, and a bristle brush. After the plastic floor is installed, remove dirt and debris in this way.
2. Lightly wipe the mark printed on the side of the wood floor with alcohol or acetone.
3. Use conventional floor cleaners or cleaners containing bleach (sodium hypochlorite) and detergents.
4, grease stains on the floor, immediately remove the use of household oil removal agent, and then rinse with hot water.
5. Wash areas marked with chalk with hot soapy water and bleach. Colored chalk marks are stubborn and cannot be removed, so consider using white chalk or talc on the floor.
6. Melt ice and calcium chloride or salt on the floor, most home care stores have. When the ice begins to melt, rinse it off.
7. Remove ink stains with hot soapy water and wash thoroughly.
8. Use a cleaning product containing oxalic acid or phosphate to remove dirt and rust stains on the floor. This will reduce smudges, and it may also remove them.
9. Use common rust cleaners to remove pigmentation from floor weathering.
10. According to the instructions on the bleach package, mix the bleach into the hot water to clean the wine stains and fruit stains. Gently wipe the stain and rinse with hot water.
Editor's summary: The characteristics of plastic-wood floor construction technology and plastic-wood flooring are introduced here, and we hope to help everyone. If you want to know more about yourself, you can follow the information on this site.
Wooden floor
Drinking Water Faucets, Drinking Water Tap, Kitchen Drinking Water Faucet, Stainless Steel Drinking Water Faucet
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalves.com