Smart locks are gradually entering everyone's life, and more and more families use smart locks, but what if smart locks are broken? Calling manufacturers to repair them is too slow. The following five steps teach you to replace the broken smart lock yourself.
Five steps to replace the lock
1, take the screws: the outside of the door gussets, connecting rods and handles outside the door are all removed, and then use a screwdriver to loosen the middle of the lock body bolts;
2. Install the lock cylinder: pass the lock cylinder through the inner handle. Install the assembled inner handle on the door and install the position screw
3. Install the lock body: First, fix the bolt in the middle of the lock body with the lock cylinder, and then tighten the bolts on both sides of the lock body. Pay attention to the direction of the body lock tongue. If you make a mistake, you need to remove it and reinstall it.
4. Install the outside handle: Install the stud on the outside handle. Install the outer handle on the door and install the screw from the inner handle.
5, install all the screws . After installation, you can use it with confidence.
The steps of smart lock replacement are not complicated, so we can master some of this knowledge. If the interior door lock is damaged on some day, you can also replace it yourself and resolve the security risks at the first time.
Related browsing
Article : Depth Analysis of Features and Technical Parameters of Xinghang Smart Lock
Recommended : fingerprint lock design smart lock manufacturers wholesale smart lock price best
WIFI Smart Lock (http://zns.znjj.tv)-Professional smart lock agent joining website, providing the industry's most comprehensive intelligent fingerprint password lock joining agent, smart lock product library, smart door lock price, smart lock brand , smart lock manufacturers Daquan information, welcome to browse online consulting.
The Morse taper shank Drill Bit is a self-locking (or self holding) taper of approximately 5/8" per foot that allows the torque to be transferred to the drill bit by the friction between the taper shank and the socket. The tang at the end of the taper is only for ejecting the drill bit from the spindle, with the aid of a drift.
The arbor of a drill chuck is often a Morse taper and this allows the chuck assembly to be removed and directly replaced with the shank of a Morse taper drill bit.
Its material is high speed steel,treatment process is roll-forged
Taper Shank Drill Bit,Shank Drill Bit,Taper Shank Drills,Twist Drill
Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com