Nowadays, the installation of solid wood flooring in the home is a very common thing. The floor layout can be like "three points on the floor and seven points on the floor." From this we can see how important the installation of the living room floor is. So, how to lay solid wood flooring? Today Xiao Bian gave everyone three solid wood flooring installation methods , hoping to help everyone.
Solid wood floor installation method 1, straight paste installation
Installation material: moisture-proof cloth + floor
Ground requirements: the difference between the height is plus or minus 2mm
Suitable for: Non-geothermic and geothermal
The installation steps are as follows:
a, first to clean up the floor, after all, a smooth, clean grassroots, in order to lay a solid foundation for future use. Then, laying a good moisture-proof cloth on the ground, the moisture-proof cloth should cover the entire ground, mainly for the purpose of achieving the balance effect of moisture proof and soundproofing, and the geothermal cushion material must be chosen to be too thick and heat conduction can be used.
b. Install solid wood flooring above the moisture-proof cloth.
Solid wood floor installation method 2 high installation
Installation material: special keel + thick plywood + moisture-proof cloth + floor
Ground requirements: flatness no more than 5mm or above the second floor
Applies to: Non-geothermic
The installation steps are as follows:
a. Prepare a dedicated wooden keel. Remember that the spacing between the wooden keels must be less than or equal to 350 mm. The frame of the keel must be kept flat.
b. Apply waterproof adhesive to the top of the wooden keel, and then spread the plywood with a thickness of about 12 mm on the previously erected keel. The size of the best plywood should not be larger than 600 * 600 mm, and the spacing between the plywood and the splint should be the same. For 5 to 10 mm, then use the air gun to nail the headless nails to the splint and the skeleton.
c. Lay the damp-proof cloth on the top of the splint, and then install the wooden floor on the moisture-proof cloth, and nail it into the fixed floor with a 45-degree angle on the male nail.
Solid wood floor installation method 3, suspension type
Installation material: moisture-proof cloth + floor
Ground requirements: height difference is plus or minus 2mm
Applies to: Non-geothermic
The installation steps are as follows:
a, first repair the ground, because a clean, solid ground floor is necessary to lay the floor.
b. Laying the ground mats on the ground, and then using the floor glue on the floor mats to splice them into one.
Xiao Bian concludes: For the solid wood floor installation method introduced here, I believe we no longer have to worry about decoration master cut corners. Of course, in order to achieve a more beautiful decoration effect, more understanding of some decoration knowledge, Xiao Bian think it is still very necessary. It is hoped that the contents of Xiaobian can help everyone.
Nylon Rollers ,Nylon Roller Wheels,Nylon Rollers With Bearings,Nylon Wheels With Bearings
Jiaxing Gates Hardware Products Co.,Ltd , https://www.888gates.com