Roots screw vacuum pump unit can be widely used in pharmaceutical, chemical, aerospace, electronics, solar energy, metallurgy, food and other industries, the unit is suitable for chemical and pharmaceutical industries, high vacuum distillation, vacuum evaporation, Dehydration and crystallization process; It can also be used in the vacuum impregnation and vacuum drying process of electric power industry, or the ideal vacuum equipment for vacuum coating, vacuum smelting, vacuum heat treatment, vacuum oil filtration, freeze-drying and aviation simulation. Then Roots screw vacuum pump unit structure is what? And what are the characteristics? Then introduced Roots screw vacuum pump unit structure and characteristics. Roots screw vacuum pump unit structure and characteristics of the screw vacuum pump unit is composed of ordinary roots pump and the middle of the pump, screw pump for the fore pump in series oil-free vacuum pump unit. Roots vacuum pump and screw vacuum pump working principle and structure similar to the Roots vacuum pump and screw vacuum pump unit has the advantages of screw vacuum pump at the same time through the series pumping speed Roots vacuum pump, doubled the pumping speed of the screw vacuum pump to raise the limit Vacuum degree, at the same time make exhaust system has better energy-saving effect. Roots screw unit high degree of vacuum, high vacuum pumping efficiency. Through the matching control system, the unit should be automatically Kai, stop, and with overload, over current, water and other automatic protection. The entire vacuum unit can be anti-corrosion treatment, so that it can be used to remove corrosive gases occasions. When the vacuum pumps of the units adopt vertical stacking or stepped structure, the unit area is small, and foreign matter is not easy to accumulate for each pump and the middle pipe. It has obvious advantages when pumping gas containing small amount of condensable gas or small amount of dust. According to the size of the pumping system, work pressure and other factors reasonably configure the vacuum unit, vacuum pump unit pumping ratio (pumping ratio) can be selected between 1: 2 ~ 1: 8, the ratio will increase the pump pumping Reduced gas efficiency, reduced working pressure range, slow start, extended pre-pumping time. Extended reading: China Construction Water Exhibition water pump manufacturers rankings ptc exhibition motor top ten brands pump valve pipe fittings Show Information Industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http: // mj .liuti.cn / (Service Hotline:)
Aluminium Alloy Casement Window Handle
Aluminium Alloy Casement Window Handle,Designer Casement Window Handle,Acrylic Mosquito Net Window Handle,L-Shaped Fingerprint Lock Window Handle
BOGO HARDWARE & FITTING CO.,LTD , https://www.bogohardware.com