The structural design of the plate and frame filter press is not only convenient for people to use, but also has a certain influence on the working effect of the plate and frame filter press. In order to be more convenient in the process of later use, the structural design of the plate and frame filter press is not only As for the convenience of people's use, it also has a certain influence on the working effect of the plate and frame filter press. In order to be more convenient in the later use process, the structural design of the plate and frame filter press must be done in the initial stage. The first is the beam of the plate and frame filter press. The equipment beam mainly considers several aspects, one is its length and carrying capacity. The beam is mainly used to place the filter plate of the equipment. Under the joint action of the static plate and the push plate, the filtering space of the device is formed. Therefore, the length of the beam of the device determines the number of plates to be supported by the device, and the filter plate is limited on the side. The size, so overall limits the filter area of ​​the device. The second is the hydraulic system pressure problem (since the market now has a large number of hydraulic filter presses), the important consideration is the processing capacity of the plate and frame filter press. Since the plate and frame filter press can flexibly design the filter area and the throughput according to the needs of the customer, there is often a big difference in the size of the same type of equipment, and the pressure of the equipment filter chamber is made by pressure. The system is also very different. The larger the filtration area, the greater the pressure required, and the greater the pressure-generating hydraulics, the larger the cylinders and hydraulic stations required. Finally, the consideration of the plate plate filter press plate boss. For plate and frame filter presses, the biggest difference between filter plates of different sizes is the boss. The biggest consideration for the design of the boss is the capacity of the filter plate. When the recessed part of the filter plate can withstand the work of the device, It is not necessary to design the boss under pressure, and the boss needs to be added when the pressure exceeds the bearing capacity of the recessed portion of the filter plate. For details, please refer to the structure of the plate and frame filter press in the following figure: The design of the frame and frame filter press structure is closely related to the effect it exhibits. Therefore, it is very necessary to make the structural design of the plate and frame filter press. The frame filter press will make a greater contribution to the future efficiency. Http://://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Corrugated Pin,Industrial Fasteners,Corrugated Rolling Pin,Corrugated Fastener Pin
Taizhou Risco Stainless Steel Products Co.,Ltd , https://www.riscofastener.com