As we all know, infusion pumps for medical infusion system is very important, can be described as "a good player in medical equipment." In patients with infusion, depending on the patient's situation, the infusion pump can play the role of speed. Infusion pump is so important, what is the infusion pump operation flow? Xiaobian this interpretation for you. A people "coveted" infusion pump product infusion pump operation process 1, the infusion pump is fixed on the infusion stand, connected to the power supply. 2, Open the pump door, the appropriate position of the bottom of the Murphy's eyedropper infusion tube installed from top to bottom on the infusion pump clip, close the pump, and open the infusion screw. 3, open the power switch on the back of the infusion pump. 4, select the infusion set, set the infusion volume, infusion flow rate and drip rate per minute. 5, in accordance with the principle of sterile operation puncture, puncture success, press the [Start button] to start infusion. 6, infusion is completed, press [stop button] to stop infusion. 7, open the pump door, remove the infusion pipe, close the pump door. 8, turn off the power switch, put the power plug. The above is the infusion pump operating process full interpretation, I hope your understanding and operation of the use of help. Further reading: Pump and Valve Tube Fittings Exhibition Information 2016 Exhibition Information Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: Fenfen (QQ / Wechat:) (Service Hotline:)
Check Valve,Swing Check Valve,Water Check Valve,Stainless Steel Check Valve
Wenzhou Dico Valve Technology Co.,Ltd. , https://www.dicovalves.com