〠names not listed in order】
1. Enter the work area and do not wear the helmet properly according to the regulations;
2. Labor protection clothing that meets safety standards is not worn during the operation;
3. Labor protection clothing is not fit;
4. After the work clothes were flawed, they were not repaired in time, and they were not cleaned in time after being stained with oil;
5, wear slippers at the job site;
6. Do not wear safety shoes when working in designated areas or types;
7. Shirtless work when the climate is hot;
8. In the hot work industry, the neckline, cuffs, trousers and laces are not well tied;
9. The climbing operation is not a seat belt;
10. Do not wear gloves during assembly work;
11. Do not wear goggles during grinding operations;
12. Wear gloves when operating the rotating machine;
13. Wear gloves when playing sledgehammer;
14. No goggles are worn during gas welding and gas cutting operations;
15. No health masks are used for welding operations;
16. No protection against harmful light, radiation and noise;
17. Talk to someone who is working;
18. When an accident occurs, it is gathered at the location of the incident;
19. Car riders in the factory;
20. Enter the construction site or work after drinking;
21, spitting;
22, smoking smoke or not smoking at the designated place;
23. Playing and playing in the workplace during the working hours;
24. Railway crossings and trains are robbed;
25. Stand in the middle of the road and talk;
26. Working in the absence of lighting;
27. When the machinery and equipment are operated, the energy is not concentrated;
28. Failure to participate in safety education or training on time;
29. Do not confirm the safety of the construction environment;
30, the handover work is not clear;
31. Straight up and down the ladder;
32. Stay on the edge of the height where there is no fall prevention measure;
33. Inappropriate placement of tools and workpieces used in high-altitude operations;
34. Pass under the weight of the crane;
35. When the objects are lifted, the ground construction personnel are not avoided;
36. Do not listen to others to discourage entry into dangerous areas;
37. Ignore the danger sign into the danger zone;
38, casually enter other workplaces;
39. Feel free to touch unfamiliar machinery, appliances and control switches;
40. Dismantle the safety warning sign without permission;
41. Unauthorized removal or addition of hanging panels;
42. Do not take anti-fall measures when cutting residual materials and construction accessories at high places;
43. No temporary anti-fall measures were taken after the temporary manholes and material holes were opened;
44. No licenses are engaged in special operations;
45. Do not perform safety inspection on the equipment used before operation;
46. ​​Use tools and equipment that are not used by you;
47. Failure to follow the command of the commander to lift the operation;
48. Safety devices on the tools used for disassembly;
49. Closed places are illuminated by open flames;
50. Arbitrarily place construction auxiliary materials and produce finished products;
51. Regardless of the brutal construction of the construction process;
52. When the construction conditions are immature, the construction is barely;
53. The job posture is stubborn;
54. Excessive work force or uncoordinated movement;
55. Transfer tools and workpieces by throwing;
56. Impact with pressurized industrial gas cylinders;
57. The acetylene cylinder is used upside down;
58. Fixed when assembling or adjusting large workpieces;
59. Do not clean up the job site in time after the completion of the work;
60. After the high-level operation is completed, the objects are stored on the hanging plate;
61. When communicating, do not communicate with other operators;
62. A single person carries a heavy object of more than 50 kg;
63. When two or more people lift heavy objects, the slogans are inconsistent;
64. Cross the load-bearing steel cable;
65. The internal pressure of the pressure vessel uses an illumination voltage higher than 12 volts;
66. Entering a small, closed compartment without supervision.
67. During the rain, the electric welding and gouging operations shall be carried out in the open air, and no measures against electric shock shall be taken;
68. Welding work in a closed container, without taking measures against electric shock;
69. Conduct welding operations in wet places without taking measures against electric shock;
70. Leave the post without authorization when exercising guardianship duties;
71. Use of equipment and tools that have been scrapped;
72. Use tools with security flaws;
73. Use mechanical equipment overloaded;
74. When the lifting operation is not comprehensive, the command signal is not accurate;
75. Standing on the hanging object to direct the lifting operation;
76. Overloading lifting equipment;
77. When the lifting work is lifting the object, the binding is not strong;
78. Unauthorized pulling of temporary power supply lines without permission;
79. Facing the electric switch pulling and closing the electric switch;
80, electrified maintenance and maintenance of electrical equipment;
81, the welding work circuit line connection is not standardized;
82. Unauthorized installation of fixed lighting facilities for the production of medium and non-safety voltage power supply;
83. Driving speed in non-special vehicle factory area (10 km/h);
84. The welder does not protect the welder from zero;
85. The electrical equipment did not cut off the power supply after the work was completed;
86. The gas welding gas cutting equipment does not close the gas source in time after the completion of the work;
87. Automatic fire without permission in the fire-prohibition area;
88. Arbitrarily place objects, hinder fire prevention and escape passages;
89, do not understand the situation around the workplace, free to work on fire;
90. When there is a fire or explosion factor around, take a hot work;
91. Perform welding and cutting operations on small barrel containers of unknown origin;
92. Take the task of welding and cutting the pressurized pipeline and container;
93. Do not use the gas cutting soft belt according to the specified color code;
94. Ventilation with oxygen;
95. Smoking on the vessel;
96. After the hot work is completed, the remaining fires will not be cleaned up in time;
97. Stacking objects around key parts such as fire hydrants and fire extinguishers;
98. Use water or foam fire extinguishers to save electrical fires that have not been powered off;
99. Store flammable and explosive substances under the electrical switch;
100, privately store dangerous substances such as fuel.
LED street lights are a modern and energy-efficient lighting solution for public spaces such as roads, highways, and parks. They use light-emitting diodes (LEDs) to produce bright and uniform light while consuming less energy than traditional street lights.
LED street lights are available in a range of wattages and luminous fluxes, allowing for customization to meet the specific lighting needs of different spaces. They also have a long lifespan, reducing maintenance costs and minimizing the need for frequent replacements.
In addition to their energy efficiency and durability, LED street lights offer other benefits such as instant-on lighting, dimming capabilities, and the ability to integrate with smart city technologies for improved management and control.
Overall, LED street lights are a reliable and sustainable lighting solution that can help cities and communities reduce their energy consumption and carbon footprint while providing safe and efficient lighting for public spaces.
LED street light housing,Streetlight Empty Housing,Outdoor Light Housing,Street Light Fixtures,Street Light Die Casting Housing
Yangzhou M.T. New Energy & Lighting Group Co., Ltd. , https://www.mtstreetlight.com