[Asian pump network hearing] vertical multi-stage centrifugal pump disassembly process must be carried out in accordance with strict procedures, or there may be security risks, resulting in damage to equipment, the operator may be injured. The following is the vertical multistage centrifugal pump detachment steps. Vertical multi-stage centrifugal pump disassembly process 1 in the pipeline will pump out. 2 Loosen the motor fixing screw and remove the motor. 3 Pull the coupling out with a ram, disassemble the bearing box, release the additive gland, and remove the packing. 4 Loosen the pump body screw, detach the pump body from top to bottom (mark it), carefully remove the seal, and remove the impeller and its bush one by one (note the order). Finally remove the shaft. 5 installed the opposite order. Disassembly in strict accordance with the above steps is the premise of vertical multistage centrifugal pump normal work, so must not slack off. This article is copyrighted industry interconnect (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor: Edward Ng as (QQ / micro letter:) starting: http: //beng.liuti.cn / (Service Hotline:)

Extra Heavy Duty Caster have Single Wheel and twin wheel ,

Extra heavy duty Move Twin wheels Casters Good Solid Wheel For Wheel Barrow Material Handling.

The mounting type:rigid\brake\swivel .

The load capacity:more than 1T.

The steel fork surface;zinc coating\power paining and so on.

Application:industrial caster wheels.

we have different single wheels for option.

5 SERIES Extra Heavy Duty Caster,100MM 150MM 200MM 250MM 300MM 355MM 400MM rigid swivel brake

Ningbo Mywin Caster Co., Ltd. , https://www.mywin-caster.com