Many owners of converted old houses will have these questions in the settlement process: why are the same areas and materials, and the old houses are about 20% more expensive than the new houses? In fact, professional old house decoration can also be very cheap and spend money on the knife. Experts pointed out that compared to the new house, the old house decoration is not only a few more demolition process, but also involves the re-layout of the room, the water, heating, power, doors and windows, air duct, partition walls, walls, top In many other aspects, the owner must pay special attention to the difference between it and the new house decoration.
 Xinghui Tile Kaitu Sofa     Blue silk fabric
Foreman reminder 1
Diy is creative but can't be casual
At present, many new discs are already on the verge of suburbs and even more distant places. For the majority of young people working in the urban areas, the old houses and second-hand houses in the urban areas are not one-step and satisfying, and they can at least solve the immediate problems. , Such as convenient transportation, complete facilities, close to work and so on. The foreman reminded the young owners, especially the ones who had never had renovation experience. The old houses had many details of decoration and they should not “walk by feelingâ€.
"Thinking that the budget is not enough, you can choose to decorate the guerrillas, or buy some of your own materials and look at the renderings. Feel free to change the location of the bathroom or open up the load-bearing walls and widen the space. The owners certainly want more creativity in the design, but too Indiscriminately, do not talk about the principle of decoration, only help the workers who have little knowledge of the construction to help with the renovation, relax the basic knowledge of the old house, and sooner or later have problems. Leakage, leakage, weakening of the wall pressure, easy to cause disputes after the home improvement, It wasn’t worth it.†The foreman pointed out that many details of second-hand housing would not be handled properly, and the consequences would be much more serious than new homes.
Foreman reminder 2
Brush wall paint, floor pavement
To prevent the original decoration "sequelae"
In addition, some old houses are some years old, and former residents are inevitably “moving hands and feetâ€. Therefore, when refurbishing, pay attention to the circuit of the room. “Now many home appliances have relatively large power, and if they are used for a long time, they will overwhelm the already aged wires. Before renovating, it is best to ask the electrician to replace all the old wires with new copper wires. Air-conditioned wires are best used for special purposes. Double-stranded copper wire, air-conditioning outlets have to be installed separately, it is recommended to use about 16A sockets.The main switch of the house power (air-open) also have to be replaced, if you want to use more than 2 cabinet-type air-conditioning, it is best to use about 20A empty Open, but it should be noted that open air is not the bigger the better, home use generally does not exceed 25A, too large open air to lose power protection.
The manager of the old house engineering department said that after the wires are in place, the owner can handle the walls. Now more popular is the quick-drying wall paint, "brush this wall paint, the bottom should be very clean, the old house before the wall has varying degrees of fouling, so before painting, be sure to carefully check the decoration Whether the worker has finished the wall surface clean and smooth, so that the wall paint brushed out is beautiful enough."
After the wall surface is finished, the ground should be finished. The floor of the second-hand house is either covered with a floor tile or a wooden floor, or it is smoothed with cement. If it is a cement-smoothed floor, the new type of floor tiles and wooden floor can be directly paved. Try harder again. If you have already paved a floor tile or a wooden floor, you must destroy the resurfacing.
“There is no problem in the living room and the bedroom. It is mainly the kitchen and the bathroom. There are waterproof layers underneath the ground. When cleaning the old ground, care must be taken to avoid the destruction of the waterproof layer. Once it is destroyed, the house may experience water seepage. It will cause great trouble for people to have their own water seepage test."
- Old Housing renovation points link:
1. First scratch the wall, the house wall will be peeling and cracking for a long time, so after handling the wall, brush the primer and then brush the latex paint finish.
2. The doors and windows shall be reconstructed, and the wooden windows shall be peeled. After the treatment, the decorative surface shall be added, and the window can be used continuously. If the steel window is rusted, the aluminum alloy window is changed.
3. For plumbing, electricity should be transformed, the first surface of the water treatment, check the water, heating pipeline is rusted, if rust, aging must be removed to replace the new, modern home appliances are many, according to national standards, the decoration must use 2.5 Millimeter copper wire must be insulated with PVC when it is buried in the wall.
4. To be thoroughly disinfected, spray with 3% lycopene, 1%-3% bleach, or 3% peroxy acetic acid. Sprinkle doors and windows 1 hour after spilling.
5. Do not tamper with the load-bearing structure. The building structure of the old house is not the same as the current standard and must be treated with caution.
Second-hand House Renovation Entrance Decoration Children's Room Decoration Paint Window House Renovation New House House Renovation Expense Budget Decoration Living Room House Decoration Effect Drawing New House Decoration Effect Drawing Cloth Sofa Cloth Sofa Cushion Wall Cabinet Cloth Sofa Kitchen Cabinet Door Floor Tiles Bathroom Tiles Bathroom Doors Bathroom Design Toilet Waterproof Bathroom Tiles Bathroom Leaking Tiles Floor Tiles Bedrooms Kitchen Tiles ld Tiles
Aluminium Die Casting Parts,Aluminum Die Casting,Die Casting Machine Parts
Chuang Hong Mei Metal Products Co., Ltd. , http://www.tzcastingmfg.com