What is the flow of the installation procedure for the gas alarm?

Before introducing the installation steps of the gas alarm, understand the concept of the gas alarm. The gas alarm is the gas leakage detection alarm instrument. When the gas in the industrial environment leaks and the gas alarm detects that the gas concentration reaches the critical point set by the explosion or poisoning alarm, the gas alarm will send an alarm signal to remind the staff to take safety measures. The gas alarm is equivalent to automatic. Fire extinguishers and the like, can be installed to drive the exhaust, cut off, spray system to prevent explosions, fires, poisoning accidents, thus ensuring safe production. Gas alarms can measure various gas concentrations. It is often used in chemical plants, oil, gas stations, steel plants and other places where there is gas leakage.

Gas alarm installation steps

installation method

In the selected wall position, corresponding to the two mounting holes on the random mounting plate, the punching mark is made (the hook on the board should be horizontally upward);

Lay the mounting holes, put in the random installation rubber plug, and then fix the mounting plate to the wall with random self-tapping screws;

Align the three holes on the back of the body with the fixing hooks on the mounting plate to hang the body;

After connecting the relevant output signal line, turn on the power.

State test

Normal monitoring status: After the power is warmed up for 3 minutes, the green light is steadyly illuminated, indicating that the alarm is working normally in the monitoring state; during the warm-up process, the alarm may sound “beep...beep” and the red light flashes, and the green light disappears before the light is off. normal.

On-site alarm status: When the gas content in the air around the alarm exceeds the alarm point, the alarm will emit a “beep...beep...” intermittent squeaking of the ear, while the red indicator light flashes to remind the user to do the on-site processing as soon as possible; alarm output status: live sound and light After the alarm lasts for 10 seconds, different types of alarms will output different types of alarm signals, notify the alarm system or activate the corresponding linkage.