Bathroom waterproof material, construction must grasp both hands

Bathroom leaks and water seepage are the most common complaints. Bathrooms do waterproof work, including not only whether waterproof construction is in place, but also the quality of waterproof materials. Floor drains, wall corners, and pipe roots are the most problematic details. Experts recommend: Choose the waterproof material is the best choice for component environmental protection polyurethane coating.

Brand Shop: ZhongTao Bathroom Rocca Bathroom

This kind of coating can tightly enclose the pipeline and the ground, penetrate into the gap, and does not shrink after drying. Therefore, it is more suitable than a rigid material such as waterproof cement, which is more suitable for small-sized houses with more gaps in the bathroom. When buying this type of paint should choose brand paint, material costs per square meter of about 50 to 60 yuan.

It is understood that some domestic brands of polyurethane paint manufacturers have their own construction team, the public can purchase paint at the same time, require manufacturers to provide professionals.

In order to make the waterproof period longer in the future, the paint generally needs to be brushed 3 times. In order to allow the paint to fully dry out, it is not possible to choose to conduct it in rainy or humid climates. The dry period of general one-component environment-friendly polyurethane coatings is about 3 to 4 days.

Including the one-component environmental protection polyurethane coating, the cement layer covering the coating, and the facing brick, the material consumption per square meter will generally not exceed 400 yuan. In this way, a bathroom of 5 square meters in size, re-waterproof about 2,000 yuan, bath and other bathroom facilities need to be re-arranged.

After the waterproof construction is completed, all sewers of the toilet shall be blocked and a “low wall” shall be built at the entrance of the bathroom for water injection test. The height of water injection shall be about 20cm. After 24 hours inspection, if there is no leakage around the bathroom wall and the ground, the waterproof quality of the bathroom is very good. Instead, find the leak and perform repairs.

The wall should also be waterproof. In order to achieve a better waterproof effect, the general bathroom wall should also be about 30cm high waterproof treatment to prevent stagnant water through the wall. The wall adjacent to the bathtub is also higher than the upper edge of the bathtub.

Therefore, there is no loophole in the waterproof work of the bathroom, otherwise a little problem will bring endless troubles, and once the bathroom leaks, it is very troublesome to remedy.

Links: Standard construction steps for wallpaper, wall coverings

Can not save the place paint cement housing bathroom waterproof bathroom waterproof material bathroom door bathroom leak

Wind Energy Fasteners

Wind Energy Fasteners,Hex Bolts Studs&Nuts, Washers

Wind Energy Fasteners (4)
Yokelink has been supplying fasteners for the wind energy industry for over 10 years. These fasteners are utilised in producing a gearbox, a valuable wind turbine component located within the nacelle. we also offer standard fasteners in line with ISO or DIN, including vibration-resistant security products. Wind tower bolt plays a important role as joining components in fastening different parts of wind turbine tower, YOKELINK is a professional manufacturer which supplies high grades fasteners 8.8-12.9 for wind tower projects.

Product Ranges:
wind turbine fastener

We currently service all aspects of the wind turbine market, Our extensive range allows wind
turbine manufacturers to 'single source'all their fastener requirements with all the advantages that this brings,
providing a range of fasteners, both standard and customer bespoke for:
●Foundation
●Tower Construction
●Blade to Hub
●Nacelles
●Off-shore Transition Pieces

We, Yokelink manufacture, stock and supply wind turbine bolts, nuts and screws:

Hex cap screws DIN 931, DIN 933 and ISO 4017
Hex Bolts and Nuts, size M10-M64
Stud Bolts size M12-M64
Threaded Rods size M10-M64
Tower Flange Bolts size M10-M64

WHAT ARE WIND POWER FASTENERS?
Wind_energy-New
Fasteners used in wind power tower and blade connection and transmission, including hex bolts, stud bolts, tower flange bolts, foundation bolts, threaded rods, high strength double head screw, hardened and structural bolts, nuts, washers and threaded rods, and hex cap screws etc.

WHAT'S THE CHARACTERISTICS OF WIND POWER FASTENERS
High strength, high grade and precision, can work in hard conditions like extremely hot and cold environment and corrosion resisted .In wind turbine generator system, because of the randomness of power source, hardness of operating circumstances, special producing and installing, as well as high costs of maintaining, the requirements for wind turbine bolts would be extremely high. We have to take effective actions to ensure the reliability of the bolts connection, from the bolts structure design, manufacture process to production and assembling.

WHAT BOLTS ARE USED IN A WIND TURBINE?
Wind turbine bolts, there are wind turbine blade bolts, wind turbine anchor bolts, wind turbine foundation bolts, high strength and high tension hexagon head bolts, nuts and washers are mainly used for wind turbine.

HOW MANY BOLTS ARE IN A WIND TURBINE?
A most common 3 blades wind turbine requires almost 25,000pcs fasteners. With the rapid increase of wind energy demand in the worldwide, the fasteners for wind turbine and energy increased greatly as well.
Most high strength bolts used for wind turbine are grade 10.8, grade 12.9 and the coatings are also very crucial, Dacromet are most commonly coating in wind turbine fasteners.
Welcome to inquiry for above wind power fasteners at sales@yokelink.com, we look forward to become your reliable partner of wind turbine bolts, nuts and threaded rods.

When you need Wind Power Fasteners
,
refer to above our catalog. We offer them in a full selection of sizes, provide the diameter or part number to get a quote of wind power fasteners, leave your message, or send us an email. You can also call us to get answers to your questions and place your order.


hex head bolts Hex Nut and Washers Wind Energy Fasteners (2)
Wind Energy Fasteners Supplier China, Yokelink
sales@yokelink.com

Wind Energy Industry,Wind Power fasteners, Wind Turbine Construction,Wind Energy Fastener, ISO 4014, ISO 4017,ISO 4032,EN 14399-4,Wind Nacelle,hub, Stud Bolts,Double Ended Studs,Lock Washer

Ningbo Yokelink Machinery Co.,Limited , https://www.yokelink.com