Die casting floor construction process and process?
Die casting floor construction process and process?
First, what is the stamper floor?
The color stamping floor is also called art floor and embossed floor. It is a ground material with strong artistic and special decorative requirements. It is a ready-to-use high-strength wear-resistant floor material with special mineral aggregates, inorganic pigments and additives. The utility model has the advantages of easy construction, one molding, long service period, quick construction, convenient repair and fading, and at the same time, it also makes up for the insufficiency of the overall color road board brick, such as poor overallity, unevenness, easy looseness and short service period.
Second, the characteristics of the stamping floor:
The slab floor is also called embossing and embossing floor. It has the advantages of beautiful appearance, no fading, firm texture, high strength, corrosion resistance, frost resistance, fire resistance, no toxicity, easy to damage, and convenient paving.
Third, the scope of the stamping floor:
Can be widely used in villas, apartments, resorts, bars, cafes, hotels, cultural and entertainment venues, golf courses, commercial plazas, outdoor parking lots, gardens, courtyards, living room halls and other indoor and outdoor concrete floors.
Fourth, the construction steps of the mold floor
1. Rafing the surface of the crucible: Add 1cm of cement slurry before the initial setting of the concrete surface. Use the hand iron plate to evenly level the surface of the concrete and grind the surface.
2. Spreading hardening material: Spread the specified amount of 2/3 hardener stamping floor evenly on the concrete surface in the initial setting stage. After the hardened material absorbs water and wets, use manual iron plate to level the light to complete the first operation. The hardened material is initially condensed to a certain stage, and then a second 1/3 material spread is collected and leveled.
3. Leveling and lightening hardening materials: According to the hardening condition of concrete, at least three times of manual iron plate light collecting and leveling operations shall be carried out, and the light receiving operations shall be interlaced with each other.
4. Dispensing powder: When the surface of the hardened material is initially solidified, the surface is dry and there is no obvious moisture, and a layer of release powder matched with the hardened material is evenly spread.
5. Press the pattern with the mold to keep the mold flat and flat. The pressed pattern should be formed without one weight.
6. Achieve a variety of design styles, textures and colors.
V. Floor maintenance and requirements
1. The construction of hardened stamping floor materials is generally carried out outdoors, and should be prevented from being carried out in rainy weather and windy weather. The construction environment temperature is generally above 2 degrees.
2. Flush the floor surface: the mold to be hardened is completely dry and solidified for at least 2-3 days. The surface can be cleaned with water or detergent. The cleaning surface must ensure the same level of cleaning of the entire floor, otherwise it will cause the ground color to be shallow. Not one.
3. Coating curing agent: After the surface of the floor of the hardened stamping mold is completely dry and free of moisture, the liquid curing agent can be applied at least one day to make the surface of the hardened stamping floor anti-pollution and re-strengthen. After completion, the hardened stamper floor is very stable in addition to its good decorative properties.
Shanghai Panshi Landscape Engineering Co., Ltd. is located in Xinyuan Road, Xinzhuang High-tech Park, Shanghai. Convenient transportation, 20 kilometers from Hongqiao Airport and 35 kilometers from Wusong Pier. It mainly produces and sells colored floors (permeable floor, embossed floor, etc.). The products are of high quality and good service. Welcome to consult!
Contact information;
Company Name: Shanghai Panshi Landscape Engineering Co., Ltd.
Contact number (Miss Li)
Company Tel /52277021/52277022http://news.chinawj.com.cn Submission:
We were founded in Y2015 at Singapore Industry Park, Suzhou, which is half hour`s car ride from Shanghai. In Y2019, we setup our HONGKONG office to support the growing of oversea business. We has established two business units to support different market strategy. Winch is our star product in off-road BU. We provide electric winch various from 2000lbs to 20000lbs, serve the industry for ATV/UTV, Jeep and truck. We also provide hydraulic winch from 10000lbs to 20000lbs, to serve the professional rescue industry. To ensure our winch always has best quality and best cost, we manufacture each key component by ourselves, like motor, gear box, rack, etc. Our manufacturing process covers Aluminum die-casting, punching, machining, CNC, and so on. Our quality department follows ISO 9 0 0 1 to control the process quality and the product quality. We provide our customer OEM/ODM service. The new design will be provided to support the new developed customer and protect the existing customer as well.
Our company utilized the on-line and off-line business model to enhance better customer service strategy. We have been striving to create value to our customer, supplier as well as our staff. Through us, we will live out the vision of glorifying God and benefiting people.
17000 Lbs Winch,17500 winch,engine winch,trailer winch,winch for front truck
Suzhou DAO Material Technologies Co.,Ltd , https://www.dao-compass.com