In the price increase warfare of this spare parts, the increase of wearing parts such as sheet metal, top cover, fasteners, hood and door seals is undoubtedly the biggest, such as the car hood of a certain brand, previously only sold. 350 yuan, but now it has risen to 400 yuan; the top cover has also risen from 900 yuan to more than 1,000 yuan, the price of accessories such as automobile wiper blades has also increased by more than 40%, and the increase of some imported rare accessories is close to 50%. . Since the beginning of this year, the national auto market prices have continued to decline slightly. The domestic auto prices in the first quarter fell by 1.08% compared with the same period of last year. However, the price of auto parts and accessories has risen across the board, making consumers confused. In the past few days, many auto parts and accessories have begun to quietly increase prices. The price of an ordinary car battery has risen from 300 yuan to 400 yuan; some brands of water tanks, crankshafts, electrical appliances and other parts with smaller replacement frequency, the increase rate is 10%-15%; the price of lubricating oil is different The increase rate is not equal. Among them, the oil price below 50 yuan is about 5%, the increase above 100 yuan is about 10%, and the increase above 200 yuan is 20% to 30%. In recent years, tire prices have been rising. Since the tire price has risen three times last year, it has received a notice from the manufacturers at the beginning of this year. The price increase range not only includes first-line brands such as Michelin, Bridgestone and Goodyear, but also the price of tires such as Kumho and Pullback of the second and third-line brands. It is reported that the sharp increase in the price of the tires began with foreign countries. Affected by the "butterfly effect", domestic tire market prices have seen large-scale price increases. In this regard, the relevant dealers believe that this year's tire prices may be adjusted again. According to the changes in consumer prices in March released by the National Bureau of Statistics, the national consumer price level rose by 3.6% year-on-year. Among them, the price of fuel for vehicles and spare parts, which was greatly affected by oil prices, rose by 7.6%. Many car owners began to feel the pressure of increased vehicle costs. The frequent increase in oil prices has greatly increased the pressure on the use of cars, and now the increase in the sales price of spare parts has undoubtedly increased the pressure on daily vehicles. Related sources said that the price increase of spare parts will definitely be opposed by the majority of car owners. At this time, in order to alleviate the contradiction brought about by the price increase, when the manufacturers supply spare parts, they will change the model of the similar products previously supplied, and then increase the price. In this case, even if the consumer has doubts, it will only accept the reality of “price increase†because of the different product models. According to industry insiders, the reason for the price increase of auto parts this year is mainly the “chain reaction†caused by the rising prices of raw materials. Parts and components companies are not only facing the price increase of steel, but also the price increase of chemical materials. This year, the global oil price is high, and the production of rubber in Southeast Asia such as Thailand is reduced due to climatic reasons. The price of tire raw materials this year has increased by 40% compared with last year. Therefore, the price of the first tire has risen by about 20%. In addition, as a labor-intensive enterprise, the rise in labor costs cannot be ignored. In 2012, China's provinces raised their minimum wage standards. The increase in employee wages and social insurance benefits increased the employment cost of enterprises by nearly 20%. Due to the “superimposition†effect brought by many factors, the price of other spare parts related to automobiles has almost increased. The reason for the overall increase is that some auto parts have been unable to digest the profit pressure brought by the rising cost to the company itself. Due to the lack of high value-added products, large parts orders will be fled China in 2012. "In recent years, the profit margin of automobile sales has been shrinking. In order to reduce the pressure brought by the rise of raw materials, it is not excluded that more brand spare parts will be added to the price increase in the near future." A person in charge of parts and components said.
Cell Culture
Petri Dishes (Stackable & Slippable)
Manufactured from medical-grade virgin polystyrene
Ventilation ribs reduce condensation and allow air circulation
Consistent flatness allows for even media distribution
Flared lid skirt and squared corners for easy one-hand operation, especially with gloves
Stackable Petri Dishes
Recommended for standard microbiology or general laboratory use
Stackable lid design for increased stability
Available in two sizes: 60mm x 15mm and 100mm x 15mm
Automation Petri Dishes (Slippable)
Designed for automated filling and streaking systems
Side Arrows and ISO Mark Target for automation
Available in 100mm x 15mm size
Petri Dishes (Slideable)
Features a partial edge ring on base which allows a single dish to be slid from a large stack and enhances stability when stacked
Petri Dishes (Non-treated Cell Culture Dishes)
Stronger, heavier construction
Surface is hydrophobic and does not facilitate cell attachment
Available in four diameters: 35, 60, 100 and 150mm
150mm x 15mm Petri Dish now available
35mm dish has off-set bottom for improved handling
60 & 100mm dish features a grip ring on the base
Lids contain molded spacers for gas exchange
Stackable lid design for increased stability
Packaged sterile (gamma irradiated)
Cell Dish,Inoculating Loops,Culture Plate,Pasteur Pipette,Cell Culture Dish
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yymeds.com
