In the daily life, we may have encountered this problem, if you are interested in this issue, the following is about the storage of fluoroplastic centrifuge pump Introduction. Fluoroplastic centrifugal pump storage 1, the pump has not been installed on the unpainted surface should be coated with a layer of suitable rust inhibitor, oil lubricated bearings should be filled with the appropriate oil, grease-lubricated bearings should only Fill a grease, do not use mixed grease. 2, a short time pump clean liquid, flushing, suction lines, discharge lines, pump housing and impeller, side by side net pump housing, suction lines and discharge lines in the flushing fluid. 3, drain the bearing box of oil, then add clean oil, thoroughly clean the grease and then fill the new grease. 4, the suction port and drain sealed up, the pump is stored in a clean, dry place, to protect the motor windings from damp, with anti-rust liquid and anti-erosion liquid jet pump casing inside. 5, pump shaft once a month to avoid freezing, and lubrication of bearings. Read more: China Building Water Exhibition Pump Valve Tube Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Yiwu Expo Industry Interconnection (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http://beng.liuti.cn/ (service hotline:)
Glass wool can be made into many different products, such as glass wool pipes, glass wool felt, glass wool pipes, etc
Glass wool
Zhengzhou Ou Nuo Building Materials Co., Ltd. , https://www.yuounuo.com