Some people think that the life of the door lock is not as long as expected, or sometimes the door handle is not consciously loose, but does not know what is going on, and does not know the maintenance tips of the lock. Today I will share with you how to maintain your own door lock.
1. After opening the door, the handle should be rotated to retract the door's locking tongue, and then the door frame is combined to release the hand. Avoid serious collisions with the door lock, otherwise it will shorten its life.
2. The rotating part of the lock body is kept lubricated (for example, adding lubricant), so that the friction of the lock body itself can be reduced, thereby increasing the service life of the lock itself. In addition, it is best to check the lock nails frequently to prevent loosening.
3. The lock cylinder is also a place we often touch. After a long time, the key will not be smooth during the process of plugging and inserting. At this time, it is recommended to add some lubricious items to the lock cylinder. Of course, the lock cylinder is absolutely unable to add lubricant or some oil substances. Therefore, it is considered to add some graphite powder, which is the pencil core powder, which can best lubricate the lock cylinder.
4. Always check the fit clearance between the lock body and the lock plate, the height and the fit of the lock tongue and the lock plate, and the gap between the door and the door frame. If these are not properly matched, we need to make appropriate adjustments. .
The above four are the tips for the maintenance of the locks that I have prepared for everyone. Everyone pays attention.
Editor in charge: Liu Jiehui
Radar Level,Radar Level Meter,Radar Level Gauge,Radar Level Sensor
Wuxi Winsun Automation Instrument Co., Ltd , https://www.jswxwinsun.com