Electronic fence system communication line connection rules 1 A zone is a series loop from the launch part to the front fence, and then to the receiving part, must be in series, not parallel, not branched.
2 The conductors should cross the intersection and must be connected by high-voltage wire (high-voltage wire). Do not use other material wire instead to avoid conductive or short circuit and prevent excessive disconnection.
3 Between the wire and the wire, there must be enough space between the wire and the metal conductor to avoid short circuit.
4 After the entire fence is assumed to be good, there should be a good grounding system. The grounding point should be separated from the grounding point of the power line. The grounding resistance should be less than 4 ohms.
5 The connection between the alloy wires can be done in two ways. One is to connect with the self-winding method, and the joint should be wound tightly, not less than five laps. The second is to use a wire connector to connect the two wire leads that need to be connected to the connector, and then use pliers to press the wires in the connector. Since the crimping is not necessarily tight, there may be looseness. Therefore, the two heads must be wound on their own wires, the winding must be tightly wound on the wound wire, and the number of windings is not less than 5 turns. Afterwards, our company will use the wire. Clips to replace the line connector, save material procurement costs and easy installation, more beautiful.
6 Avoid different metal wires. Because the metals of different natures are connected together, there will be corrosion caused by electrochemical reactions. Therefore, the materials of the inner core and the alloy wire of the high-voltage insulated wire must be of the same material.
2 The conductors should cross the intersection and must be connected by high-voltage wire (high-voltage wire). Do not use other material wire instead to avoid conductive or short circuit and prevent excessive disconnection.
3 Between the wire and the wire, there must be enough space between the wire and the metal conductor to avoid short circuit.
4 After the entire fence is assumed to be good, there should be a good grounding system. The grounding point should be separated from the grounding point of the power line. The grounding resistance should be less than 4 ohms.
5 The connection between the alloy wires can be done in two ways. One is to connect with the self-winding method, and the joint should be wound tightly, not less than five laps. The second is to use a wire connector to connect the two wire leads that need to be connected to the connector, and then use pliers to press the wires in the connector. Since the crimping is not necessarily tight, there may be looseness. Therefore, the two heads must be wound on their own wires, the winding must be tightly wound on the wound wire, and the number of windings is not less than 5 turns. Afterwards, our company will use the wire. Clips to replace the line connector, save material procurement costs and easy installation, more beautiful.
6 Avoid different metal wires. Because the metals of different natures are connected together, there will be corrosion caused by electrochemical reactions. Therefore, the materials of the inner core and the alloy wire of the high-voltage insulated wire must be of the same material.
Hydrogen Peroxide 50% Industrial Grade,Hydrogen Peroxide 35% Food Grade,Industrial Grade Hydrogen Peroxide,Food Grade Hydrogen Peroxide
Shijiazhuang Xinlongwei Chemical Co., Ltd. , https://www.xinlongwei-chem.com