The stone engraving machine has special characteristics. One problem that often occurs in the engraving process is the broken knife phenomenon. The main reason is that the stone is relatively hard after all. If the cooling water supply is not timely or the processing speed is too fast during the engraving process, the spindle speed is too slow. It will affect the tools and materials.
How to solve the problem of broken knife in stone engraving machine? If the tool is broken, the operator should immediately suspend the machine, then check the current processing line number and record it in detail. Carefully check the broken knife to see if there is a broken knife body, if it is removed. The most important thing is to analyze the main reason of the broken knife (stone mall) and avoid the next crime. Then it is to change the tool. After changing the tool, it should be noted that the origin is defined. After the stone engraving machine returns to the workpiece origin, the position of the X/Y axis is correct, but the Z axis needs to be re-determined, which is mainly based on what has been done. The style of the graphic is used to define the operation.
The reason why the stone engraving machine is broken is mainly: the machining feed is too fast or the rotation speed is not enough, the tool quality is not good, the processing knife is too large, the tool clamping length is insufficient or the tool is shaking. Of course, it is also related to the processed stone. The hardness of different stones is different.
China Rotary Evaporators, Rotovap, Rotary Evaporation , Rotary Vacuum Evaporators, Industrial Rotary evaporator, Rotary Evaporator Rotovap turnkey system with recirculating chiller and Vacuum Pump for complete vacuum distillation for essential cbd thc hemp oil distillation and extraction machines .
Small Rotary evaporator 1l 2l 3l 5l for essential oil cbd hemp oil distillation and extraction
Rotary evaporator 1liter-- RE201D
Rotary evaporator 2liter-- RE201E
Rotary evaporator 3liter--RE301
Rotary evaproator 5liter--RE501 with ptfe bottom discharge valve
The purpose of the rotary evaporator rotovap is to remove low boiling organic chemicals, usually solvents, from a mixture of compounds .
The rotary evaporator always for distillation and extraction under vacuum pressure . The motor runs the rotation flask moving and heating water oil bath pass hot energy to the mixture of rotary flask . Then low boiling point of mixture will be heated and form a thin film and make evaporation . The lower boiling point mixture make morphological change from liquid to Vapor or hot air . Then hot vapor meet condenser cooling coil then become liquid again and fall down to collection flask .
Water bath rotary evaporators 1L 2L 3L 5L 10L 20L 30L 50L glass flask
China Rotary Evaporators, Chemistry Rotary Evaporator flask, Water bath Rotary Evaporators, Laboratory Rotary Evaporators,auto rotary evaporator, rotary evaporator with chiller and vacuum pump, Rotary evaporator rotovap cbd thc hemp oil distillation
Zhongyi Kori(Zhengzhou)Equipment Co.,Ltd , https://www.korireactor.com