When we decorate the house, there will be a treatment of the yin and yang angles, which is the corner of the room. The shaded surface is the yin angle and the sun is the positive angle. The general corners are not easy to handle. No matter which corner is exquisite, we are decorating. when you need to pay attention to the process, then what method overcast corner wall treatment have that? What precautions wall construction that have negative angle? Xiao Bian below the decoration of the home network come to tell you about it.
First, the wall surface negative angle processing method
1, batch ash processing
To deal with the corners of the corners of the corners and the corners of the walls, we must first approve a layer of ash on the base layer, and then carry out the elastic line, so that the pop-up line can be seen more clearly. We can use a gray knife to clean the corners or corners of the wall and the surrounding bumps. If the cleaning is not clean, these obstacles will be encountered when the line is broken, which can cause the bullet to not be straight.
2, wall corner or positive angle bullet
We can use the line vertical vertical line to handle the elastic line in each vertical wall corner or the positive angle position. Then, based on the vertical line of the wall yin and yang angle, we put a sum of 500mm on the left and right sides. The parallel line of the wall corner and the positive angle of the wall can be defined as the “standard line of yin and yangâ€.
3, brush putty
We can use the putty to straighten the corner of the wall along the ink line, wait for it to dry, then open it with ash, use a 2 meter L-shaped aluminum alloy to pull one end by one foot, parallel to the side of the wall from the negative side Push to the corner of the corner, push it to the corner of the wall, gently twitch back and forth, and then scrape it in parallel, so that the negative angle after the treatment will not have a small bend.
Second, the wall corner construction considerations
1. Many wall corners have a lot of negative angles. If you play a straight line to find a supplement, the wall may be thicker, but if you find too thick, it will easily cause problems such as empty drums and falling off, and the angle of the wall will be corrected. It is no longer 90 degrees, but it is very troublesome to not find straight. The more scientific treatment method is: check the negative angle, if there is a lot of mistakes, then there must be a high place, first knock out the high place, then the line to find straight, the negative angle is basically 90 degrees, It is also straight.
2. When installing, you should avoid deforming the plaster line, the joint should be smooth, the slimming should be clean, and the line should be straight. During the installation process, the installation personnel must be skilled, quick and neat. It is best to have a sandpaper grinding process and repair work, the effect should not see the joints, and the interior is integrated with the indoor environment.
We all know that the decoration houses are now dealing with the corners, so there is the construction of the yin and yang angles. Then, what are the treatment methods and construction precautions for the wall corners? I want to introduce them through the above small series. I understand that, if you still want to know more about decoration, please continue to pay attention to the decoration home Internet cafe.
More related wonderful reading:
What are the uses of the Yinjiao Yang in the wall?
How to deal with the corner of the wall? Wall corner treatment method
What is the gypsum Yinjiao line? How to install gypsum Yinjiao line?
What are the classification of the Yinjiao line? How to stick the Yinjiao line?
Use a thread insert kit to replace a stripped thread or add a threaded insert into sheet metal, fiberglass or other brittle material. Choose from kits with standard inserts or helical inserts (also known as helicoil inserts). Thread repair kits include everything you need to repair or install threaded inserts, including a hand drill and installation tool to speed maintenance and reduce downtime.
Tool And Kit For Insert,Sti Tap For Thread Insert,Electric Tool For Thread Insert,Spring Loaded Tang Break Tools
Shenyang Helisert Technology Co., Ltd , https://www.helisert.com