The amount of keys is large (the amount of change of the teeth is large). The usual pin locks, because of the diameter of the marbles, the arrangement is not very tight, generally only 5 sets of marbles; the usual film locks, because of the spring, and the slant of the teeth Degree requirements, the arrangement is not likely to be very close, generally only 8 films. Therefore, the amount of keys can usually only be a few thousand to nearly 10,000, and rarely more than 100,000. The lock adopts a bundled slide structure, four slots, one bundle of three slides per slot, and a total of four bundles of 12 slides, which are divided into three independent slots, inner slots The outer cogging and the rear cogging, the relative positions of the three coggings are interchangeable; each slide is divided into four levels, so there can be a very large number of permutations and combinations, and the theoretical key amount is 412*6=100 million.
Anti-technical unlocking The strong lock uses 3 sets of cogging systems. Each set of cogging system has 4 sliding pieces. These 3 sets have a total of 12 sliding pieces, which are independent of each other and close to each other, and can hardly be undisturbed. Moving, plus no springs, can't hold the slides, so it's almost impossible to unlock the technology.
Simple structure and small size Usually, the lock must increase the amount of keys, and must increase the volume. To increase the difficulty of technical unlocking, the mechanism must be complicated, and the complexity of the mechanism not only increases the volume, but also increases the processing difficulty and increases the production cost. The lock adopts a springless bundling type sliding plate structure, has a simple structure and a relatively small volume, and the lock body has an outer diameter of less than 19 mm and a length of less than 21 mm. If you reduce the amount of keys, the volume can be further reduced. Due to its small size, it is suitable for making locks and lock cylinders that meet various requirements and is widely used.
The production cost is low because the structure is simple, so the production cost is low, and a total of 12 kinds of slides can be mass-produced with a small die.
These tip combs are for use with the Pharma KingFisher Flex 96 Deep-Well Head Magnetic Particle Processor or MagMAX Express-96 Deep-Well Magnetic Particle Processor in combination with PrepSEQ ResDNA kits and ProteinSEQ kits.
Optimize performance using KingFisher Flex System consumables designed specifically for use with these instruments. KingFisher Flex disposable plastics (tip combs and microplates) are made of polypropylene and are ideal for magnetic particle processing because of their low binding affinity for biomolecules. Their special design enables excellent recovery of magnetic beads.
The tip combs are made of PP material, they can be used with 2.2ml square well V bottom and 0.5ml elution plates for the system KINGFISHER FLEX. The tip combs could suffer centrifuge 3000-4000 and don't change the original shape. The products are suitable for the standard ANSI and multi-channel Pipette Tips machnie and automatic equipment. We could accept OEM/ODM.
For use with Viral RNA extraction, DNA extraction, RNA/DNA quantification, immunopreciptitations and many more KingFisherâ„¢ applications
good chemical and physical resistance: e.g. phenols, chloroform, DMSO and temperatures as low as -80°C/-112°F
Tip Comb,Tip Comb Plate,Kingfisher Tip Comb,Tip Comb Kingfisher,Magnetic Tip Comb,8-Strip Tip Comb
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyue-pcrtube.com