Panel structure At present, there are many installation methods for curtain wall panels at home and abroad: integral type, in-line type, fixed type inside, fixed type, externally mounted fixed type, externally mounted external fixed type, external buckle type, etc. The panel structure is different. It is mainly composed of three parts: panel, rib, and fixed code. Insulated rock wool can be filled on the back when there are special requirements. In order to ensure the rigidity of the single-layer aluminum plate in long-term use, the ribs and the panel are connected by bolts, thereby increasing strength and rigidity.
The mechanical processing process of the panel machine plus the process panel: the lofting one cutting and the lowering of the material, one folding, one welding, one drilling, one drilling, one reinforcing rib, one surface cleaning, one packaging, and the storage. Stakeout: First check whether the original model specifications of the aluminum plate meet the drawing requirements. Find out the best layout and stakeout solution to achieve the lowest loss stakeout. Cutting and cutting: hydraulic shearing machine and universal angle shearing machine. Pay attention to the defects such as arching, scratching, wrinkles, and burrs on the control panel.
Folding: The equipment hydraulic bending machine is used. If the roll is rolled, the hydraulic three-roller is used. Pay attention to the N value of the bending diameter coefficient of the aluminum plate. Control board surface quality, should be free of burrs, cracks, delamination, cracks, wrinkles and other defects. Welding: A hydrogen arc welder is used to weld all interface locations. The welding wire is selected correctly, the weld seam is even and full, and the polishing and polishing should be handled well. Kind of nail: Germany BS310-G capacitor energy storage stud welding machine. Less welding spatter, small back welding marks, does not affect the panel decorative surface, weldable range M3 - Ml. Note that the nail position is correct, the quantity is accurate, and the nails are vertical. The hole is drilled, drilled or drilled. Examine the drawing before drilling, and the adjacent two panel mounting codes should be staggered, otherwise the collision code cannot be tightened. The aperture is correct. The quantity is accurate.
Phillips Bugle Head Screw,Phillips Flat Bugle Head Screw,Bugle Head Cross Recessed Drywall Screw,Phillips Hex Head Self Drilling Screw
Handan Jiankun Hardware Products Co., Ltd / Handan best import and export trade co., Ltd , https://www.jkscrew.com