Self-priming centrifugal pumps should be selected in accordance with the delivery of liquid, and check the required performance, analysis of suction, discharge conditions, is intermittent operation or continuous operation. Self-priming centrifugal pump test run should meet the following requirements: First, the steering of the drive should be the same as the pump steering; second, to identify the pipeline pump and coaxial pump steering; Third, the fixed connection should be no Loose, the lubrication parts of the lubricant filling specifications and quantity should be consistent with the provisions of technical documents; Fourth. Pre-lubrication requirements of the site should be pre-lubricated; Fifth, all indicating instruments, safety devices should be sensitive , Accurate and reliable; Sixth. Coach should be flexible, no abnormalities; Seventh. The high temperature pump should be preheated before the test run, the temperature should rise evenly, the temperature rise per hour should not exceed 50 ℃; Pump The temperature difference between the surface and the process pipe with working medium inlet shall not be more than 40 ℃. 8. Set the connection device to eliminate the influence of temperature rise and set the bypass connection device to provide the cooling water source. Self-priming centrifugal pump operation should pay attention to the following points: First, to prohibit anhydrous operation, do not adjust the suction port to reduce displacement, prohibit the operation of low flow; second, to monitor the operation of the process, completely prevent packing boxes Leakage, replacement of stuffing box with a new packing; Third, to ensure that the mechanical seal has a full flush of water, water-cooled bearings prohibit the use of excessive water flow; Fourth, do not use too much lubricant; Fifth, according to the recommended cycle of inspection. Establish operating records including operating hours, packing adjustments and replacements, adding lubricants and other maintenance measures and times. The self-priming centrifugal pump suction and discharge pressure, flow, input power, lotion and bearing temperature and vibration conditions should be measured regularly recorded.
Barbecue wire Grill Grate is made of high quality 304 stainless steel, never rusting and durable. BBQ Wire mesh does not have any coating or chemical ingredients, making food safer.
Multi-functional Grill Cooking Grid Grate: This wire mesh is mainly used for BBQ Grill Mat for outdoor cooking, it can also be used as a cooling and baking rack. Or you can develop other uses for it.
Cooking Grid
Shenzhen Lanejoy Technology Co.,LTD , https://www.baking-rack.com